Flame Retardant Coatings

Description

Flame Retardant Coatings

is use for electric cables, cable trays and installations

Alvar Plast Sepahan produce Flame Retardants Coating as uniform high viscosity mastics for Industrial and buildings cables and metallic structures that used in the Iron and Steel Complexes , Oil and Gas Refineries and Petrochemical Industries.

Advantages of Flame Retardant Coatings

♦ Fire protection materials have the advantage over similar materials that they have adhesiveness and flexibility despite their fire protection properties and are especially suitable for cables that are flexible materials that can be bent and straightened and fall in They are not visible.

♦  They do not contain halogen and toxic substances and do not release toxic gases. (suitable for closed places)

♦  It is environmentally friendly.

♦  It prevents the spread of fire and reduces the intensity of heat release.

♦  The production of carbon monoxide and carbon dioxide gases is greatly reduced.
The protective mechanism of these materials is the swelling mechanism. In this way, this material swells up in the face of fire and becomes a porous charcoal that protects the bottom layer.

♦  This coating by itself is not insulated in the normal state, and for this reason, there is a heat transfer capability for the cable. Rather, during a fire, it swells into coal and becomes porous and becomes insulated. For this reason, there is a problem for the heat exchange of the cable. does not bring

♦  The required thickness of the coating on the cable to prevent fire is 2.5 to 3 mm. This number has been approved by the Wire and Cable Standard Laboratory, Technology Research Management and Iron Smelting Localization.

♦  This product was tested by the Isfahan fire department in a fire simulation, which was completely successful.

Uses of Flame Retardant Coatings

The cases where the Flame Retardant Coatings is used are:

♦  Horizontal and vertical cable trays of tunnels

♦ Cables close to furnaces

♦ Cables close to control rooms and panels

♦ Cables related to the fuel pump room, the central room of the lubricant pump

♦ Cables adjacent to fuel, oil and oil storage tanks

♦ Entrance and exit gate cables of halls

♦ Installations and pipes and connections adjacent to the storage of flammable materials and places where there is a high risk of fire

How to implement Flame Retardant Coatings

How to implement the Flame Retardant Coatings are:

♦  Mix thoroughly for at least 5 minutes before use
♦ If covering is intended for the cable, its power should be cut off during the covering and cleaning of the surfaces.
♦ Initial cleaning of the surface from any pollution such as oil, grease and dust
♦ Applying the coating on the surface by spraying or brushing
This product can be used with a brush, Airless and Kinitex sprayer
In this way, a thin layer is applied first and after 15 minutes and the coating is self-adhering, the next layer is applied. This work continues until the final thickness of the coating reaches 3 mm. The coating depends on the seasons and different climatic regions within 3 to 5 days. It dries up.
♦ If the cover is applied to a large bundle of cable, it is better to cover the thickness of 4.5 mm.
♦ Final cleaning of spilled stains

How to maintain Flame Retardant Coatings

The methods of maintaining the Flame Retardant Coatings are:

♦ Storage in 1, 4 and 20 liter plastic containers packed by the manufacturer in a completely closed and sealed manner
♦ Store in a closed and covered environment.
♦ Standing position
♦ In an environment away from direct sunlight
♦ Pay attention to the best use by date and consult the manufacturer if the date has passed.
♦ Storage temperature 0-30 degrees Celsius
♦ Protect from freezing

 

The results of fireproof coating tests

♦ Flame resistance test

♦ Isfahan fire department and safety services test report

♦ Wire and cable reference laboratory

♦ Test report of the Housing Research Center

 

Call 09131282478 for more advice and explanations about fireproof coating.